Fastway FLIP 88-00-4500, Инструкция по установке и эксплуатации

Страница: 8 / 12

INSTRUCTIONS FOR USE
Do not use the FLIP foot to support a trailer parked on grades
steeper than 5% (~3°).
Both driver and passenger sides of the trailer must be securely
chocked when using the FLIP jack foot.
Do not support trailer with jack foot resting on sloped ground
or debris .
Jack foot base plate must be in complete contact with ground.
STEP 4
When uncoupling your trailer, make sure that the trailer is parked
on fairly level ground. Pay special attention to the site when dry
camping to make sure the slope is not more than a 5% grade (3˚),
either side-to-side or front-to-back.
5%
3°
Do not use FLIP with trailer parked on a slope steeper
than a 5% grade, or 3 degrees.
Also make sure that the spot where the jack foot will rest is as level
as possible, and free from debris like sticks or stones that might
keep the jack foot from being completely supported.
Chock the wheels on both sides of the trailer securely. Disconnect
trailer plug, safety chains, and breakaway cable from the tow
vehicle. Uncouple the coupler, and extend the jack to raise the
coupler off the ball.
If using a weight distributing hitch, you may use the jack foot to
raise both the tow vehicle and trailer to make it easier to disconnect