Fastway FLIP 88-00-4500, Инструкция по установке и эксплуатации

Страница: 9 / 12

fastwaytrailer.com Page 9
the hitch. Make sure to not exceed the 4,000 lb maximum lift
capacity. Once the spring arms are disengaged, lower the trailer
and tow vehicle back to a point where the tow vehicle is supporting
the trailer’s tongue weight. Uncouple the coupler, and extend the
jack to raise the coupler off the ball.
Support tongue weight with jack foot in the vertical position
and only with the jack resting on the support plate.
STEP 5
The FLIP jack foot is designed to
straighten automatically as more
weight is applied. At times it may be
helpful to move it forward slightly with
your foot to make sure it sits directly
below and in line with the jack so the
jack tube rests correctly against the
front of the jack foot and on top of the
support plate.
If the full tongue weight is placed
on the jack with the jack foot out of
position, the inner jack tube can bend,
resulting in improper function of the jack or jack foot. It may also
damage the jack foot or trailer.
If you must drop the trailer where there is not enough ground
clearance for the FLIP to operate correctly, simply remove the pin
and remove the FLIP from the jack.
Correct Incorrect
STEP 6
To couple your trailer, back the hitch ball under the coupler.
Retract the tongue jack until the coupler rests on the hitch ball.
Lock the coupler. If you are using a weight distributing hitch, extend
the jack to make engaging the weight distribution bars easier.