Fastus D4RF Series, Руководство пользователя

Страница: 69 / 138

3-45
1
2
3
Basic Usage
Frequently Used Functions
3-7-4 [P9] Stretch Mode
This mode displays the received light amount multiplied by the set factor.
90
100
900
1000
4500
5000
MEMO
• If the numeric values of the received light amount and threshold are close, this function can be used to display these
values multiplied by factors of 10 or 50. This makes it easy to check whether there is a sufficient difference between
the threshold and received light amount.
• This mode only magnifies the displayed numeric values. It does not amplify the actually detected received light
amount.
The value of the received light amount that is transfered via IO-Link communication is also not affected.
„
Selectable Options
You can select from the following stretch factors.
Selectable
option
Function description
Off (default value) Displays values without multiplication.
On - x10 Displays the values multiplied by 10.
On - x50 Displays the values multiplied by 50.
„
Operation Procedure
* To cancel the setting, press the
TEACH
ESC
key.
1
Press
MENU
OK
, and then use to select the
menu.
Display “Display” on the main menu.
2
Press
MENU
OK
, and then use to select the
menu.
Display “Stretch mode” on the sub menu.
Continued on next page
The values displayed for the received light amount and threshold increase.
The larger the multiplication factor, the easier it is to check the difference
between the displayed threshold and received light amount.
Received light
amount
Threshold
x 50 (difference between threshold
and received light amount: 500)
x 10 (difference between threshold
and received light amount: 100)
No multiplication (difference
between threshold and received
light amount: 10)
1
2
MENU
OK
TEACH
ESC
S6
Display
1
2
MENU
OK
TEACH
ESC
P9
Stretch mode