New Classic Edition 2.0
FASTTEL Klipsenstraat 18A 9160 Lokeren
Tel : + 32 (0) 9 244 65 20 FAX:+ 32 (0) 9 244 65 29 Email:
Web :
WWW.FASTTEL.BE
17
8807
= default setting
8815
= highest loudspeaker level
8807
= medium loudspeaker level medium micro sensitivity (default)
8800
= highest loudspeaker level
lowest micro sensitivity
18. Setting ID code
A DTMF ID code or Speech (option) can be set in the Wizard.
When you answer a call coming from the Wizard, it can be used when you hear a tone or
speech message (option).
How ?
Code
7 00
XXXX
#
Max. 13 digits
eg. 7 00
12354678
#
(end sign)
Code
6 70
DTMF/speech not active (no tone or speech will be heard in case of door call)
Code
6 71
DTMF/speech active (tone or speech will be heard)
Code
5 00
do not send
#
after ID code
Code
5 01
send
#
after ID code
Code
5 60
Tone: send DTMF tone (tone will be heard when picking op the phone)
Code
5 61
Speech: send Speech (speech message will be heard when picking up the
phone)
Code
5 70
Tone: send DTMF tone on loudspeaker (tone will be heard at the doorstation)
Code
5 71
Speech: send speech on loudspeaker (speech will be heard at the doorstation)
19. Setting dialling tone detector
Before the called number is sent, the Wizard will check if the 425Hz dialling tone is
available.
How ?
Code
6 20
do not wait for dialling tone (425 Hz)
dialling starts after 2 seconds.
Code
6 21
wait for dialling tone before dialling. (useful when dialing tone ≠ 425 Hz)
20. Setting door station transparent
You can put the door station transparent on the line.
This can be practical to hear the ring back tone during the call.
How ?
code
5 40
door station not transparent on line (ring back can not be heard)
code
5 41
door station transparent
(ring back can be heard)
New Classic Edition 2.0
FASTTEL Klipsenstraat 18A 9160 Lokeren
Tel : + 32 (0) 9 244 65 20 FAX:+ 32 (0) 9 244 65 29 Email:
Web :
WWW.FASTTEL.BE
18
21. Setting activation door contact on call
When a visitor pushes the button on your Wizard doorstation the door contact is
automatically activated. This is very much used in medical practices. The entering of the
person in you building is announced by the ringing of your telephone.
How ?
code
510
do not activate door contact when calling
code
511
activate door contact when calling
22. Speech module FT25SPEECH (option)
Recording of and listening to personal text(s).
It is possible to record 2 different texts of maximum 2 x 8 seconds in the Wizard if the
optional print is available. Consult your supplier before installation.
How ?
Code
9 00
listen to speech text 1(=speech heard when you pick up phone when door
call)
Code
9 01
recording of speech text 1 (max 8 seconds)
Code
9 10
listen to speech text 2(=speech heard at the doorstation when called)
Code
9 11
recording of speech text 2 (maximum 8 seconds)
23. Input/output module FT4SW or FT8SW (option)
This input/output module extends greatly the possibilities of the Wizard series. Thus, you
can make 8 additional controls with your telephone and the optional keypad. Therefore, the
FT8SW is also necessary when you have to control independently several doors. The external
cameras are also integrated via this module. You can then again select these cameras via the
telephone. It is also used to redirect automatically the Wizard series in your absence to
another number (for example, a GSM number).
24. Image on TV: UHF modulator (DB9713)
You can also see you visitor on your normal TV, in case of Wizard with video. The video signal
of the Wizard camera has to be connected to this modulator by twisted pair (R11). This
device can be installed on your cable TV distribution network or between your antenna and
TV. The Wizard video image will be modulated on a free UHF/TV channel. Contact your
installer for more information.
25. LCD monitors (FT20CC)
