New Classic Edition 2.0
FASTTEL Klipsenstraat 18A 9160 Lokeren
Tel : + 32 (0) 9 244 65 20 FAX:+ 32 (0) 9 244 65 29 Email:
Web :
WWW.FASTTEL.BE
9
2. Programmation code
You can only change the settings which you will find further on in this guide after you have
entered the programmation code.
How :
Call the extension number or phone number on which the Wizard is connected.
The Wizard will pick up with de DTMF tones or the recorded speech message (optional)
- enter *1996* on the keypad of your phone
After the correct entering of the digits, the Wizard will answer with 3 tones.
Eg.
* 1 9 9 6 *
teet teet tuut
The Wizard is now ready to accept your settings.
Remark :
The Wizard will quit the line if no DTMF codes are received within 10 seconds. This will first be confirmed by 2
beeps (error).
Each correct programmation code will be confirmed by one beep.
Each incomplete or incorrect code will be confirmed by 2 beeps (error).
Eg. Programmation code 710. You do nothing, 10 seconds later beep beep and the Wizard quits the line.
3. Calling
You can call the Wizard for :
Direct communication of programming. The Wizard answers automatically after a
preprogrammed number of rings. On delivery the Wizard is set to 1 ring. You can change this
setting.
How ?
Code
84XX
XX is the number of rings before the Wizard will answer.
00 stands for 255 rings
01 stands for one ring, 02 for two, 99 for ninety-nine.
Remark : automatic calling: let ring at least one time and not more the 3 times. You put the
phone down and call back within 20 seconds.
New Classic Edition 2.0
FASTTEL Klipsenstraat 18A 9160 Lokeren
Tel : + 32 (0) 9 244 65 20 FAX:+ 32 (0) 9 244 65 29 Email:
Web :
WWW.FASTTEL.BE
10
4. Programmation codes Wizard
In the table below you find all the programmation codes to personalize the behavior of the
Wizard. (only after forming *1996* by telephone during conversation)
Code
530
Load default values factory settings
Default table
DESCRIPTION
CODE
default
Calling
84XX
01
1
st
button, 1
st
destination
710
empty
#
1
st
button, 2
nd
destination
711
empty
#
Redial - occupied/repeat n/y
660/661
661
Number of ring next destinat.
82XX
10
Number X repeat when occup.
83XX
05
2
nd
day number active
650/651
650
Day/Night setting
#
8X
Day
DTMF/Impulse dialling
600/601
600
Password active contact n/y
550/551
550
Password for security
85XXXX
1111
End conversation code
4xx
09
(Door) contact code
2xx
02
Maximum conversation time
80XX
08
Impulse / toggle contact
610/611
610
Time duration contact
81XX
10
Steps 5 sec./100msec.
520/521
521
Setting speaker/micro
88XX
07
ID code
700
1111#
DTMF/speech active yes/no
670/671
671
#
after ID no/yes
500/501
500
DTMF/Speech 1 on line
560/561
560
DTMF/Speech 2 on LS
570/571
571
DTMF/speech active no/yes
670/671
671
Door station transparent n/yes
540/541
540
Waiting for dialling tone n/y
620/621
621
Activate relay FT8SW with short code 2
936ab
936*1
Codes keypad
920miaaxxxx#
empty
Conversation acceptance
1*0/1*1
1*0
Doorcontact after pushing y/n
510/511
510
Complete reset of Wizard
530
530
