www.fastinc.com 1-800-243-9271
229-51319 D © 2007-2010 FAST
10 & 18 Product Cooking Controllers
Operating the (FASTRON.) Meridian Controller
7
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Product Counts
To Check Product Counts:
press and hold the P key for 3 seconds. COUNTS will be dis-
played.
Press the P key. PROD 1 will be displayed then the number of cooks that were completed
on that key. To see the number for each key, continue to press the P key and each product will
display PROD X then the number of cooks.
Resetting the Product Counts:
Once you go through all keys,
the display will show CLRPROD then NO. Use the left and right
arrow keys to toggle between YES and NO. Choose YES to reset
your product count or NO to save the cook counts that have al-
ready been completed. Then press the P key.
The display will show GLOBAL. This is the total product count of
all keys combined. Press the P key again. CLRGLOBL then NO
will be displayed. Use the left and right arrow keys to toggle
between YES and NO. Choose YES to reset your total product
count or NO to save the total cook counts that have already been
completed. Then press the P key. TOTALX10 is displayed, then a
number. Press the P key again.
To Exit Product Counts:
COUNTS will be displayed. Press the up arrow key. EXIT will be dis-
played. Press the P key. The controller will exit programming mode.
Display Descriptions
Controller is in Operating Mode. Actual vat temperature is more than 10 degrees below the
programmed vat temperature.
Controller is in Operating Mode. Actual vat temperature is within the proper cooking tem-
perature range. The vat is ready to start a cook cycle.
Controller is in Operating Mode. The actual vat temperature is more than 40 degrees above
the highest programmed vat temperature. A continuous audible alarm will sound.
Controller’s probe is either open or shorted. Display will be accompanied with an audible
alarm if shorted. Check or replace the probe.
Controller is in Operating Mode and a cook cycle is in progress.
Controller is in Operating Mode and a cook cycle has been completed.
