43
When the keyboard has that the alarm option is ON, at the first power on, the camera setup
displays as above after the keyboard checks the camera automatically.
At this time, the F2E protocol could not be changed.
To add the other camera,
1. Position the cursor at the CAM field below 009, the dash blinks.
2. Twist the handle of the joystick clockwise, the next number displays or press camera
number and
CAM
button.
3. Set the appropriate protocol of the camera and the appropriate port.
4. Set the appropriate BAUD rate of the camera.
5. Press the
CTRL/PGM
button to save the camera setup.
6. Press the
ESC
button to exit without saving.
7. Press the
OFF
button to delete the selected CAM line.
Note: The baud rate of the F2E is according to the value of the set baud rate menu in the
network menu.
When the keyboard has that the alarm option is OFF, at the first power on, the camera setup
displays the blank menu and set the all camera as above.
Follow above procedure to set the camera.
* You can set 254 cameras up to the page 32.
CAMERA SETUP PAGE:001
CAM PROTOCOL PORT BAUD
001 F2E DOME1 9600
005 F2E DOME1 9600
009 F2E DOME1 9600
007 PELCO-D DOME1 2400
010 PELCO-P DOME1 2400
--- - - - - - - -
--- - - - - - - -
--- - - - - - - -
OFF:DEL PGM:SAVE ESC:EXIT
CAMERA SETUP PAGE:001
CAM PROTOCOL PORT BAUD
--- - - - - - - -
--- - - - - - - -
--- - - - - - - -
--- - - - - - - -
--- - - - - - - -
--- - - - - - - -
--- - - - - - - -
--- - - - - - - -
OFF:DEL PGM:SAVE ESC:EXIT
CAMERA SETUP PAGE:001
CAM PROTOCOL PORT BAUD
001 F2E DOME1 9600
005 F2E DOME1 9600
009 F2E DOME1 9600
007 PELCO-D DOME1 2400
010 PELCO-P DOME1 2400
--- - - - - - - -
--- - - - - - - -
--- - - - - - - -
OFF:DEL PGM:SAVE ESC:EXIT