19
Navigate to 001 Camera and configure switching methods. According to the number of MUXs
attached, the remaining camera fields can be filled automatically by pressing the
ON
Key.
ID of MuxA is always 01, and ID of MuxB is 02 or 05 depending on the quantity of MUXs
attached. (e.g.: MuxB ID=02 in two Mux system, MuxB ID= 05 in 3 MUXs or more.)
Refer to the recommended configuration examples & multiplexer configuration examples.
NOTE
: Specific multiplexer is compatible to this system. Recommended Multiplexer is
Single user : HCXooN (DUPLEX) (oo is No. of camera inputs ie, 04, 09, 16)
Multi user : HCXooT (TRIPLEX) (oo is No. of camera inputs ie, 04, 09, 16)
ALIAS PRESET MENU
<Alias Preset Menu Setup Screen>
In case HID2404HCE model, you should upgrade EEPROM data later than Ver1.13 to use
Alias Preset command.
This screen allows you to set the KBD controller’s internal alias preset, each alias preset can
have 3 dome cameras’ position. You can execute this function when alarm signal is detected
or press
No.
+
ALRM
. This programmed data is saved at the KBD controller’s memory. Alias
preset can be saved up to 1024.
You can save alias preset by press
No.
+
CTRL + ALRM
at the selected dome camera
position.
SLAVE KEYBOARD SETUP MENU
<Slave KBD Setup Screen>
This screen allows you set up Slave KBD controller, how many the slave KBD controller and
Mux menu controllability and DVR menu controllability, etc.
ALIAS PRESET MENU. PAGE:001
NO. DOMEID ALARMNO INPUT
0001: 001 --- --- 0001 NO
0002: 002 --- --- 0002 NO
0003: 003 --- --- 0003 NC
0004: --- --- --- ---- --
0005: --- --- --- ---- --
0006: --- --- --- ---- --
0007: --- --- --- ---- --
0008: --- --- --- ---- --
OFF:DEL. ALRM:EXE.SAVE:PGM ESC
SLAVE KEYBOARD
SLAVE KEYBOARD : ON
DOME HOLDING TIME :003 SEC.
SLAVE KEYBOARD UNIT
MUX CONTROL : ON
DVR CONTROL : ON
DOME MENU SETUP: ON
GRANT DOME ACCES
SAVE AND EXIT