Faster ASEPTIC, Руководство по эксплуатации и техническому обслуживанию

Страница: 9 / 68

a D:GROUP Company
00254EN – Rev. 01 – 11/2012 9
4.C SYMBOLS OF THE CONTROL PANEL
List and description of all the symbols and controls of the control panel:
12 13 14 2 15 3 4 16
5 6 7 8 9 10 11 1
1 MAIN SWITCH:
Position "0" in the "0" position, the green light of the mains voltage is on (3); the LCD
displays the model name "ASEPTIC". In this position the operator can
activate only the fluorescent light (7), the optional U.V. lamp (14) and the
power outlet (6) (with plug installed) and can see the data stored in the
microprocessor by pressing the “STATUS” key (2).
Position "I" by pressing "I" the password to enter is requested. When the password is
typed in (press arrow-up key (
▲ ) 5 times, arrow-down key ( ▼ ) 4 times) and
SET pressed the green led of the switch lights up and the isolator starts
operating, LAF and suction motor-blowers are powered and first "CHECK
PANEL" then "STAND-BY" appears on the display. The LCD shows the
required time (about 40 seconds) for the laminar flow and the internal
pressure to reach the pre-set values. In addition, an audible alarm will sound
intermittently during this stand-by period, alerting the operator not to start
working yet. When the audible alarm stops and the message "STAND-BY"
disappears from the display, the isolator is ready for use. The LAF velocity
and the internal pressure are displayed.
NOTE: In any case, it is advisable to wait 5 minutes before starting to work.
2 DISPLAY Rear lit liquid crystal "LCD" display composed of 2 lines of 20 characters
each showing the operating parameters and alarms.
3 LINE The green mains light switches on if the unit is connected to the mains and
the line is live.
4 WORKING CONDITION The green LED lights up when the ventilation works correctly.
5 GAS Not activated.
6 SOCKET This supplies voltage; when enabled, the display shows "POWER ON" (total
current for all sockets: 6 Amp).
7 LIGHT This switches on the fluorescent light; when enabled, the display shows
"Light on". Switching on the fluorescent light automatically the optional U.V.
lamp switches off.