3
Part #30161
Revised 8/14/07
FAST™
3400 Democrat Rd.
Memphis, TN 38118
Phone: (901) 260-3278 Fax: (901) 375-3408
www.fuelairspark.com
Section 1 - Fuel Pump Installation:
1.
Once the engine has been allowed to cool, disconnect the negative battery cable and relieve the
fuel system of all pressure.
2.
Raise the vehicle and support it with jack stands.
3.
Referring to the appropriate vehicle service manual for instructions, drain, disconnect any
electrical and fuel component connections.
4.
In the kit, find two AN-10 cutoff union fittings and four of the AN-10 o-rings. Install each of
the four o-rings on each end of the two AN-10 cutoff union fittings.
5.
Install each of the two fittings into each end of the provided FAST™ fuel pump.
6.
Noting the appropriate flow directions, install the provided fuel filter. If you get the two filters
mixed up, the fuel pump inlet side filter will have a 100 micron stainless steel filter element
inside, where as the fuel pump outlet filter will have a 10 micron paper filter element inside.
