Fass STK-5500, Руководство по установке

Страница: 14 / 20

C. Carefully begin to install the fuel sending unit keeping in mind the original orientation. Do not bend the
fuel sending arm. Reach in the tank and grab the bottom of the suction tube (previously prepared) and
route it through the fuel basket.
B. Attach the FL-1007 ( Viton tube) to the BHF assembly using the
hose clamp (HC-1001). Allow the tube to hang down for now.
E. Through the 2 3/4” hole assemble the SC-5500 (suction clamp) and the SB-
5500 using the 8 - 32 x 1/2” BHCS. Properly torque.
D. As seen in photo, screw in allen bolts into SC-5500’s (sump clamp). These
are used for alignment and will be removed later.
A. Attach the FL-1007 (opposite end/convoluted tube) to the DT-1002 &
SB-5500 assembly using the hose clamp (HC-1001). Allow the tube to
hang down for now.
F. Push up on the sending unit, inside the fuel tank place the SC-5500’s (sump
clamp) into place with the arches facing the fuel tank surface. Note: the ma-
jor portion of the location studs will be exiting the fuel tank.
Step 5:
re-installing Fuel Sending Unit & Connecting
sump