Fass STK-5500, Руководство по установке

Страница: 10 / 20

Step 3:
Preparing Fuel Sending Unit
A3. Using a flat tipped screw driver, remove the suction tube footing.
A2. The factory return line nipple must be pulled or pried off the outer basket
without breaking it. The nipple will be reinstalled.
A1. If working with dual basket fuel module (some Duramax applications )
follow these subsection steps. Using a flat tipped screw driver, carefully
remove the outer basket.
A. Remove non-essential features from the center of the fuel basket.
Some of the photo’s are of a different application, refer to the photos that resemble your application.
This step is not necessary if sump is NOT going to be located below the fuel sending unit.
A4. Use a sharp blade to cut the suction tube collar and remove the plastic
footing. Discard the footing.
A5. Using tool of your choice, remove the marked area on the green inner cup.
Do not cut off the locking tab! Measure twice and cut once. When cutting
plastic use sharp tools and take your time!