F.
Attach the PL-2003 to DIPF-1003. Torque to 18 ft./lbs.
G.
Remove banjo bolt connecting the outlet line of the factory fuel filter. This is the line in front of the
inlet line removed in
step f
.
H.
Move the injector return line from
step f
and stack on top of the outlet line of the factory fuel filter.
Light bending will be required, be very careful not to kink or crack this fuel line. Install the Banjo Bolt
removed in
step f
. Torque to 18 ft./lbs.
Note: Secure all fuel lines with cable ties. Cable ties are an economical way to prevent the
possibility of problems occurring!
