4000
Ͳ
LC
Series
D4580880
Ͳ
01
Page
13
of
61
Sample Probe Connection and Use
The unit control has the ability to read a 100-ohm RTD probe inserted into a
product sample. The probe assembly has a bulk head connector which is
plugged into the top of the internal chamber area. This allows the sample
probe to remain embedded within the frozen sample. This probe reading can
be used as part of a profile to achieve a more definite product temperature.
NOTE: if the sample probe is not installed or fails, an error message will
appear on any screen in which the sample probe is utilized.
Sample Probe
