SETUP
7
Note: It is necessary to identify which signal
format and refresh rate is being used in order to
synchronize the output. If the scan rate being
used is not listed, try each of the offered rates
until an image appears.
Pass-Through V Rate
60Hz
75Hz
85Hz
Note: If the HDTV Format is selected, the
V-Rate selection is not available.
OSD Status
(On-Screen-Display)
On
(Default)
Off
OSD Position
(0 = Top)
0-255
RS232 Baud rate
4800
9600
(Default)
19200
DCDi Mode
On
(Default)
Off
Film Mode
On (Default)
Off
HDTV Input Format
RGB/YUV/YPrPb
HDTV Upconvert
On/Off
The HDTV input board auto-detects if the signal
from the HDTV Tuner is 480//1080i/720p. By
selecting ON, the 480p and 1080i signal will be
doubled. Select OFF and the signals are pass-
through. 720p is always pass-through.
HDTV Sync Input
HV Sync/COM Sync
Save Setup to All
Press factory
Note: This command will save the setup
parameters to all the User Presets to prevent
accidental switching to incorrect settings. Note:
the command
<Store User Preset>
located in
the User menu will allow the user to store
picture level and aspect ratio parameters
without changing the Setup parameters, as
long as they do not access the Setup menu
and make changes.
Exit Setup Menu
Press Factory
SELECTING THE PROPER
SCAN RATE
For fixed panel display devices (DLP, LCD,
Plasma, etc.) optimum performance is achieved
by choosing the native resolution of the display.
For CRT based projectors there are a few
options. If the screen used is a wide angle for-
mat, the projector geometry should be set for
Anamorphic sources. In general, the higher the
scan rate chosen, the better the image will
become, being more cinematic with increased
light output and contrast ratio. However, if too
high of a scan rate is chosen the image can
begin to appear soft as the scan lines start to
over lap. The bandwidth of the display must
also be considered when choosing a scan rate.
As a guide line, the following settings are
recommended:
WIDESCREEN APPLICATIONS
CRT Size
Recommended Scan Rate
7"
800X600, 720p
8"
720p, 1024X768
9"
1024X768, 960p, 1280X1024, 4, 1080p
4:3 APPLICATIONS
CRT Size
Recommended Scan Rate
7"
720p, 1024X768
8"
1024X768, 960p
9"
960p, 1280X1024, 1080p
