To activate the control of the DVP5000 press:
To turn
On
press:
To select an
Input
press:
Each press toggles to the next input or press
the number pad while the OSD is visible for:
1. Composite Video
2. S-Video
3. Component
4. D1 (Reserved)
5. HDTV
6. HDTV/Computer Pass-through
To select a
User Preset
press:
Repeated pressing will toggle through the four
User and one Factory presets.
The presets can also be directly accessed by
pressing the PRESET button and then the keypad:
0 = Factory
1 = User Preset 1
2 = User Preset 2
3 = User Preset 3
4 = User Preset 4
The User Presets store all picture adjustment
information including scan rate, output format
and Aspect Ratio. To
Store
the settings press:
The OSD will display which preset is currently
selected. Select the desired preset to store the
information using the Value keys and then press
the Store key again.
To change
Aspect Ratio
press:
Repeat pressing will toggle through the differ-
ent Aspect Ratios (If available. See the Setup
section for details). Pressing the Value key after
pressing the Aspect key will also toggle through
the choices.
The Aspect Ratios can also be directly
accessed by pressing the
ASPECT
button and
then the keypad:
1 = 4:3
2 = Letterbox
3 = Anamorphic
Brightness
can be accessed by pressing:
Then adjust the
Values
by pressing the
buttons. For direct access, press the
BRIGHT
button, then enter the value on the keypad
such as
138
.
Contrast
can be accessed by pressing:
Then adjust the
Values
by pressing the
buttons. For direct access, press the
CONTRAST
button, then enter the value on the
keypad such as
158
.
Color
can be accessed by pressing:
11
OPERATION
FDJA
POWER
INPUT
CENTER
PRESET
SUR
ASPECT
MENU
BRIGHT
LAST
CONTRAST
PIP
COLOR
SWAP
STORE
ENTER
