FARONICS DEEP FREEZE ENTERPRISE 6, Руководство пользователя

Страница: 54 / 64

3<B3@>@7A3
4
Setting Up a Remote Console
Once the Server Service or RCE console has been created and configured, it can now be connected to
a Deep Freeze Enterprise console.
To install the Deep Freeze Enterprise console, complete the following steps:
1. Open the Deep Freeze Configuration Administrator.
2. On the
Configuration
tab, click the
Miscellaneous
sub-tab.
3. Configure the port settings. The port configured for this console must not be the same as the
port used by the clients or Remote Console.
This console must use a different port so it does not conflict. When connected to the remote
console, the correct port is specified. This is explained in more detail under the section titled,
Ports & Protocols Explained . For the consoles, it does not matter whether the LAN or LAN/
WAN option is selected.
4. Click the Create Programs tab.
5. Click Create Enterprise Console to create the DF6Console.exe program. A prompt to save the
file appears. By default, the file is saved to ...\Program Files\Faronics\Deep Freeze 6 Enterprise\
Install Programs .
6. Move the console program to the machine where it will be run. When the program is run, a
prompt for a One Time Password appears. A token is provided, as shown below.
7. Use the One Time Passwords tab in the Configuration Administrator to generate a password.
After entering the password, the console launches.