FARONICS DEEP FREEZE ENTERPRISE 6, Руководство пользователя

Страница: 19 / 64

3<B3@>@7A3
1
Miscellaneous
The Miscellaneous tab is used to configure the network communications protocol that the Enterprise
Console uses, as well as various security options.
Network
Communication between the Deep Freeze Enterprise Console and workstations with Deep Freeze
installed can use two different modes: LAN Mode or LAN/WAN Mode.
LAN: Check the LAN radio button to configure Deep Freeze to communicate within a Local Area
Network (LAN).
LAN mode is a self-configuring mode that requires only a port number; the default port is
7725 . The
port number can be changed if it is in conflict with other programs on the LAN. In LAN mode, the
Deep Freeze workstations and the Enterprise Console find each other through UDP broadcasts. These
broadcasts only occur when workstations or the Enterprise Console are started, ensuring that there is
little network traffic associated with workstation and Console communication.
LAN/WAN: Check the LAN/WAN radio button to configure Deep Freeze to communicate in both a
LAN and a WAN (wide area network).
LAN/WAN can be used in either a LAN or WAN environment and over the Internet. This mode uses
an IP address or the computer name, along with a port number, to allow communication between the
console and the managed workstations.
The following two methods are available to identify the Console:
• specify the Console IP , which must be static
• specify the Console Name , in which case the IP can be dynamic
When the Enterprise Console is behind a firewall or a NAT (network address translation) router,
the firewall or router must be configured to allow traffic to pass through to the Enterprise Console.
Depending on the firewall or router, workstations may need to be configured with the IP address of the
firewall so that traffic can be forwarded.
These settings can be changed on local workstations using the
Network tab.