7
Revision date: 01.27.20 115554
5
Assemble In-Line Valves
1. Place lid on reservoir and slide reservoir under
the frame.
(Actual components may differ.)
2. Cut two (2) three inch (3") pieces
of 3/4" tubing (111627) and slide
one onto each AC2804 in-line
valve.
ATTENTION:
Assemble both
valves the same.
3. Secure each connection using
one 111698 ratchet clamp.
Gently squeeze clamp until it
clicks indicating clamp is tight.
Do not overtighten. Doing so
will damage ratchet clamp
teeth.
4. Slide another clamp over each
valve assembly.
5. Attach one valve assembly to a
bulkhead attached to tray. This
will be the pump/supply fitting.
6. Verify that tube is seated tightly
on fitting and secure using
ratchet clamp.
7. Continue with next procedure.
ASSEMBLE IN-LINE VALVES
