2
115554 Revision date: 01.27.20
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the system. Additional tools may be
needed.
• Level (4'– recommended)
• Wrench set to level frame
• Ratchet with 1/2" socket to assemble frame
• Adjustable pliers and small hammer
• Gloves to handle metal tubing
• 1" hole saw bit and drill
• Tool to cut 3/4" tubing
READ THIS DOCUMENT BEFORE YOU BEGIN
Thank you for purchasing the 115554 Ebb & Flo system. When properly assembled and maintained, this system will provide years of reliable service. These
instructions include helpful hints and important information needed to safely assemble the system. Please read and understand these instructions
before
you
begin. If you have any questions during the assembly, contact customer service.
ASSEMBLY PROCEDURE
Following the instructions as presented will help
ensure the proper assembly of your system.
The steps outlining the assembly process are as
follows:
1. Verify that all parts are included in the
shipment. Notify customer service for
questions or concerns. See below.
2. Read and understand these instructions and
the information included with the shipment
before
you begin.
3. Gather the tools and assistants.
4. Assemble the system.
Important Information
SAFETY PRECAUTIONS
• Wear eye protection.
• Wear gloves when handling metal pipes.
• Use a portable GFCI (Ground Fault Circuit
Interrupter) when working with power tools and
cords.
112838
Tek Screw
FALB34B
112770
113030S03
112477
FAME51B
FAG338B
100442
PICTORIAL GUIDE
Larger parts may not be shown.
111303
111698
111301
111302
112531 HEAVY DUTY TIMER
Consult the guide included with the 112531 timer for
installation, use, programming, and troubleshooting
details.
ATTENTION:
Reservoir and lid style shown
throughout this guide may vary. When needed,
critical dimensions are noted for hole locations.
112531 Timer
AC2804
