22
22
111628M
Revision date: 09.25.18
2. After attaching all pipe hangers to the frame, take the 112527 3/4"
PVC supply manifold and position it against the installed hangers.
NOTE:
This procedure shows attaching the manifold to the frame
before adding the supply tube assemblies. These tube assemblies
can be installed before you secure the manifold to the frame. Steps
3 and 4 describe the installation of the supply tubes.
INSTALL THE SUPPLY MANIFOLD — continued
4
Assembly Instructions
Supply Manifold
STAND-ALONE UNIT
ONLY—
If you are
attaching the main
water line at the
bottom, slide manifold
up during installation
to provide the needed
clearance, or trim to
length as needed.
Trim top of manifold
if desired and cement
the WF2990 slip cap in
place with PVC primer
and cement.
ATTENTION:
Handle the supply manifold carefully during installation to
prevent damage to the supply tube fittings! These can break if handled
improperly! Actual manifold and system may differ from what is shown.
