5
CANOPIES
Revision date: 09.16.09
There can be two types of couplers used during the
assembly of the product: those that include an installed
locking eyebolt and those that do not. See above.
If the couplers included with your product do not have an
installed lock bolt, u
se a self-tapping Tek screw
to secure
the different pipes to the couplers during the assembly
process. The self-tapping Tek screws are included with the
shipment.
ATTENTION:
Tek screws are sent with all shelters of this
type. For couplers with locking eyebolts, install the Tek
screws at each pipe connection for additional security if
desired.
WARNING:
To prevent personal injury and damage
to the product,
fasten and tighten a Tek screw
at each
pipe and coupler joint.
To prevent cover damage, install the Tek screw so that
it
does not
touch the main cover or any optional side or
end panels once these are installed.
ADDITIONAL PARTS IDENTIFICATION NOTES
In some instances, there can be differences between the
parts that are shown and referenced in the instructions
and the parts that are shipped with the product. These
differences
do not
affect the integrity of the product, but can
change the assembly procedures.
The information that follows identifies possible changes in
the assembly procedure found in this instruction document.
Please implement these changes during the assembly of
the product.
3-Way Coupler (no lock bolt)
3-Way Coupler (includes lock bolt)
Space below is reserved for customer notes.
