background image

CANOPIES

2

Revision date: 09.16.09

YOU MUST READ THIS DOCUMENT BEFORE YOU  

BEGIN TO ASSEMBLE THE CANOPY WAGON

.

Thank you for purchasing this FarmTek® canopy wagon. 

When properly assembled and maintained, this product will  

provide years of reliable service. These instructions include 

helpful hints and important information needed to safely 

assemble and properly maintain the canopy wagon. Please 

read these instructions 

before

 you begin.

If you have any questions during the assembly, contact 

Customer Service for assistance.

SAFETY PRECAUTIONS

•  Wear eye protection.
•  Wear head protection.
•  Wear gloves when handling metal tubes.
•  Use a portable GFCI (Ground Fault Circuit Interrupter) 

when working with power tools and cords.

•  Do not climb on the wagon or framing during or after  

construction.

•  Provide proper ingress and egress to prevent  

entrapment.

 

WARNING:

 The individuals assembling this product are 

responsible for designing and furnishing all  

temporary bracing, shoring and support needed during 

the assembly process. For safety reasons, those who 

are not familiar with recognized construction methods 

and techniques must seek the help of a qualified  

contractor.

REQUIRED TOOLS

The following list identifies the main tools needed to 

 

assemble the product. Additional tools and supports may 

be needed depending on the structure, location, and  

application.
•  Tape measure or measuring device
•  Hammers and gloves
•  Ladders, work platforms, and other machinery for lifting  

designed to work safely at the height of the canopy.

 

UNPACK AND IDENTIFY PARTS 

The following steps will ensure that you have all the  

necessary parts 

before

 you begin to assemble the product.

1.  Unpack the contents of the shipment and place where  

you can easily inventory the parts. Refer to the Bill of  

Materials/Spec Sheets.

2.  Verify that all parts listed on the Bill of Materials/Spec  

Sheets are present. If anything is missing or you have  

questions, consult the Pictorial Parts Guide and all  

diagrams for clarification, or contact Customer  

Service at 1-800-245-9881.

 

NOTE:

 At this time, you do not need to open the plastic  

 

bags containing smaller parts such as fasteners or  

 washers. 

Содержание 104479










Отзывы: