FarmTek 104479 Скачать руководство пользователя страница 8

Страница: 8 / 9

CANOPIES

Revision date: 09.16.09

INSTALL THE MAIN COVER

After assembling the main frame, install the main frame cover.

Gather the parts:
• Snugger ball tie downs (#CC4595)
• Main cover

NOTE

: Assistance is required to install the cover.

1. Locate the main cover, unfold it along the assembled frame, and pull it onto the frame and into position.
2. Take the snugger ball tie downs, feed the stretch cord through a grommet, and attach the main cover to the

assembled frame. See below. Use one snugger ball for each grommet.

3. Read the Care and Maintenance section that follows.

WARNING:

To prevent property damage

and personal injury, do not install the

cover on a windy or stormy day.

NOTE:

A space will remain between the cover edge

and the frame as shown in the diagrams.

NOTE:

Diagram not

to scale. Frame and

wagon shown may

differ from actual

frame and wagon.

Assembly process is

the same.

Содержание 104479










Результаты поиска

Содержание 104479

Отзывы:

Бренды по названию

Популярные бренды

FarmTek 104479, Руководство пользователя

Результаты поиска

Содержание 104479

Отзывы:

Бренды по названию

Популярные бренды