Farmi Forest CR67, Руководство по эксплуатации, техническому обслуживанию и запасным частям

Страница: 7 / 48

7 CR67
WORKING IN CLOSE PROXIMITY TO POWER
LINES
Avoid working in close proximity to power lines. If, ho -
wever, you are forced to work near power lines, the dis -
tance from them must always be at least 5 20 m
of the crane work area.
Always exercise extreme caution
when working near power lines.Ob-
serve minimum safety distances.
The minimum safety distance table
is attached to the valve rack.
Ensure that you observe the regulations of the country
you are in when working near power lines.
Electricity will always flow to ground if it is given a sui -
table path.
1. Contact the local power company if you will be wor -
king in the immediate vicinity of overhead power li -
nes. If necessary, ask the power company to send an
expert to the worksite.
2. Remember - electricity does not always require direct
contact to be a hazard. High voltage electricity can
'jump' as much as 5 metres from a power line.
3. Never go near power lines! No part of the crane
should ever be allowed to go closer to overhead po -
wer lines than the minimum safety distance - not
even accidentally. Familiarise yourself with the mini -
mum safety distance specified in local electrical safety
regulations.
4. If it is difficult to comply with minimum safety dis -
tance regulations when working, you must contact
the local power company.
CRANE PRESENTATION AND
INTENDED PURPOSE
The CR67 hydraulic crane is specifically designed for the
loading of timber. The crane may not be used for towing,
lifting general cargo or lifting personnel.
The crane can be equipped with hydraulic support legs,
which are used to mount the crane to a forest trailer or a
three-point linkage on a tractor.
WORKSITES
A worksite with a level and firm surface should be used.
Avoid working on sloping terrain.
Reserve an adequate amount of working space for the
crane and transport equipment.
When moving over terrain, keep the limitations of the
base machine in mind.
WARNING