Manual
TRITON 450 PS
21
│
30
5.
MACHINE TRANSPORT ON ROADS
Transport position of
TRITON 450 PS
o
Connect the machine by attaching it to the tractor
o
Lift the machine on the axle, switch the ball valve of the axle to the closed position.
o
Fold the side frames to the transport position, switch the ball valve to the closed position.
o
Install the transport rod between the side frames and secure it with the safety pin, see the picture.
o
Tighten the English nut on the rod and secure the position with the locknut.
o
The machine must be equipped with removable shields with marking of contours, functional lighting, and
the board of the rear marking for slow vehicles (according to ECE No. 69).
o
The lighting must be activated during travelling on roads.
o
The tractor must be equipped with a special light device of an orange colour, which must be activated
during travelling on roads.
o
The maximum transport speed during travelling on roads is
30 kph
.
Transportation is only permitted when the connecting rod has been properly installed and secured!
