Manual
TRITON 450 PS
16
│
30
2.2
HYDRAULICS OF THE MACHINE
When disconnecting the quick-couplers, both valves on the drawbar must be closed in the same way as for
road transportation.
Connect the hydraulics only when the hydraulic circuits of the machine and the tractor (aggregate) are in a
pressure-less condition.
The hydraulic system is under high pressure. Regularly check for leaks and immediately remove obvious
damage of all lines, hoses, and pipe unions.
When seeking and removing leaks, use only the suitable tools.
For connecting the hydraulic system of the machine to the tractor, use the plug (on the machine) and the
socket (on the tractor) of the quick-couplers of the same type. Connect the quick-couplers of the machine
to the hydraulic circuits of the tractor so that the
RED DUST CAPS
for
folding side frames and for
setting the depth of the front levelling discs are on one control circuit, the
YELLOW DUST CAPS
for
lifting the machine on the axle are on the second control circuit, the
GREEN DUST CAPS
for setting the
front disc section are on the third control circuit, the
BLUE DUST CAPS
for controlling the rear packer
discs are on the fourth control circuit, and the
WHITE DUST CAPS
for controlling the setting of the
working depth of the machine on the rollers is on the fifth control circuit.
In order to prevent accidental or foreign person (children, passengers) caused movement of the
hydraulics, the control switchboards on the tractor must be secured or blocked in the transport
position.
RED DUST CAPS
– controlling the side frame folding
1 STRAP – folding side frames into the transport position
2 STRAPS - unfolding side frames into the working position
YELLOW DUST CAPS –
controlling the transport axle
1 STRAP – lifting the machine into the transport position, i.e. axle is
lowered down
2 STRAPS – the machine is lowered to the working position, i.e. the
axle is lifted up from the ground
GREEN DUST CAPS
– controlling the position of the front disc
section
1 STRAP – lifting the front disc section
2 STRAPS – lowering the front disc section
BLUE DUST CAPS
– controlling the position of the rear packer discs
1 STRAP – lifting the packer discs
2 STRAPS – recessing the packer discs
WHITE DUST CAPS
– setting the depth
1 STRAP – lifting the rollers (increasing the working depth)
2 STRAPS – lowering the rollers (decreasing the working depth)
Parts of the hydraulic system of the machine, which are under pressure, are forbidden to disassemble.
Hydraulic oil that penetrates the skin under high pressure causes severe injuries. In case of injury, seek a
physician immediately.
