Manual
STRIP-TILL ST4N | ST6NS | ST8NS
14
│
23
80 bar
Setting the front cutting disc hydraulic protection
1.
Check that the hydraulic hoses are connected properly under 3.2.
2.
Check that the ball valve of the front cutting disc protection circuit is open; if not, open it.
3.
Pressurize the circuit of the front cutting disc protection to 80 bar – using the hose marked with two
yellow strips; monitor the pressure on the yellow-coded manometer.
4.
Set the yellow circuit in the floating position in the tractor switchboard
5.
The protection is now prepared for work.
