![background image](http://html1.mh-extra.com/html/farmet/kompaktomat-k500ps/kompaktomat-k500ps_operating-manual_3526673018.webp)
Manual
KOMPAKTOMAT K500PS | K600PS | K700PS | K800PS | K1000PS
18
│
56
CF – Section of chisel shares in four rows
The share section is equipped with slim chisels with the width of 7
cm in four rows. The section is suitable for processing soil in spring
when it is not suitable to pull wet soil out to the surface, or for
heavy soils. There is no leveller behind the chisels.
AP – Section of shares with sweeps in two rows
AL
CF
AP
Number of rows of shares (pieces) / Row
spacing (mm)
2 / 400
4 / 240
2 / 490
Leveller behind shares
●●●●
○○○○
●●●●
All-area processing
●●●●
●●●○
●●●●
Suitable for light soils
●●●●
●●●●
●●●●
Suitable for medium soils
●●●○
●●●○
●●●●
Suitable for heavy soils
●●●○
●●●○
●●●●
Suitable for rocky soils
●●●○
●●●○
●●●●
Suitable for wet soils
●●○○
●●●●
●●○○
Resistance to clogging
●●○○
●●●○
●●●○
● – MAX /
○ - MIN
LEVELLING BARS BEHIND SHARES
LEVELLING BAR BEHIND SHARES
The bar can be used behind all types of share sections. The bar is sued for
spreading the loosened soil before the rear roller. The height adjustment
is performed using a chain, which the bar is suspended from.
FINISHING OPERATIONS
LF - REAR FINISHING LEVELLING BAR
The levelling bar behind the rear roller levels and evenly spreads the
loosened soil. Possibility to change the angle of the leveller using backstop
plates
thus increasing the efficiency of the leveller.
RF - REAR FINISHING ROLLER
The finishing roller actively disintegrates any remaining clods behind the
rear roller. Be careful – the finishing roller cannot be used behind the two-
row cross-kill rollers. Possibility to change the preloading of the draw
spring tension
thus increasing the efficiency of the finishing roller.