Manual KOMPAKTOMAT K400NS
16
5.2
ADJUSTING THE DEPTH OF THE SHARE SECTION
Apply heightened caution when adjusting the depth of the shares due to the potential rolling of the
working roller. Adjust the depth of the shares when the machine is unfolded into the working position and
standing still. The machine must be raised in the shoulders of the tractor so that there is a gap of up to 50 mm
between the solid ground and working sections.
The working depth of the shares is adjusted by turning the handle with the trapezoid thread. The handle is
located on each frame of the machine. The depth is set by turning the mounting handle. For transparent setting of
the depth, there are pointers with depth gauges near the handles. The soil processing depth is selected according
to the type of crop you want to grow. Approximate values of processing depth are provided in Chart 5.
Picture 7
–
Setting the processing depth
Picture 8
–
Setting the processing depth
Picture 9
–
Setting the processing depth
Chart 5
–
Approximate processing depth acc. to crops
5.3
ADJUSTING THE LEVELLER HEIGHT BEHIND SHARES
Perform the adjustment of the height of the levellers when the machine is unfolded in the working position and
standing still. The machine must rest on the working sections.
The leveller behind shares is used for levelling the cultivated soil after the rear row of arrow shares before the
rear roller. The height of the leveller behind shares is adjusted by the chain between the leveller and the bearing
frame. The chain is screwed to the leveller and it is passed through and eye in the bearing frame and secured.
The height of the leveller is set in relation to the working depth of the shares. The deeper the processing is, the
higher the leveller needs to
go. Set the leveller height “V” above solid ground between
60
–
100 mm.
CROP
DEPTH
Beet
2-3 cm
Rape
3-5 cm
Wheat, barley, oats
5-8 cm
Depth gauge
Securing handle
after setting
Handle
Mounting handle
for depth setting
