Manual KOMPAKTOMAT K400NS
14
4.
TRANSPORTING THE MACHINE ON GROUND
COMMUNICATIONS
4.1
Put the machine into the transport position.
Transport position for the machine (Chapter 3.3.1)
Attach the unfolded machine to the rear three-point mounting of the tractor using TSP 3 pins.
According to Chapter 3.3.1, fold the machine into the transport position and secure the side frames by the
connecting rod.
The machine must be equipped with removable shields displaying the boundaries, functional lighting and
a board of rear label for slow vehicles (pursuant to EEC No.69).
The lighting must be turned on when in operation on ground communications.
The tractor must be equipped with a special light appliance with orange colour that must be turned on
when in operation on ground communications.
The maximum permissible transport speed for the operation of the machine on ground communications is
20km/hour.
4.2
The operator must drive with increased caution when transporting the machine on ground
communications dues to the transport dimensions of the machine.
4.3
The operator must observe valid regulations for the operation on ground communications (acts, decrees)
after connecting the machine to the tractor due to the changes in the load of axles. The driving properties
of the set also change in relation to the character of the terrain; therefore adapt the method of driving to
these conditions.
4.4
If requested, the operator shall submit the technical certificate of the machine according to the valid
regulations for the operation on ground communications (only in the Czech Republic).
4.5
When reversing with the attached machine, the operator shall ensure a sufficient view from his or her
position as the driver of the tractor. If the view is not sufficient, the operator shall call a qualified and
instructed person.
4.6
The operator must secure the shoulders of the rear tractor TPS in the transport position when transporting
the machine on ground communications, i.e. by the handle of the hydraulic control of the shoulders, in
order to prevent a sudden drop of the shoulders. At the same time, the shoulders of the rear tractor TPS
must be secured against side swing.
4.7
When transporting the machine on ground communications, the operator must observe the related valid
acts and decrees that specify the relations of the load on the axles of the tractor in relation to the transport
speed.
4.8
It is forbidden to transport the machine on ground communications when visibility distance is
reduced!!
