FarmChem APX DPM10G, Руководство пользователя

Страница: 5 / 16

FarmChem | www.FarmChem.com 800.247.1854 | FarmChem
5
2. Insert the metal end of the hose into the swivel. Tighten complete with an
open ended adjustable wrench.
NOTE: The threaded end of the meter always has female threads. The meter end of the hose must have
threads. Apply thread sealant, anaerobic adhesive or equivalents, to the male end. The inlet and outlet swivel
connections are 1/2” NPT & 1/2” BSP, depending on their meter model.
1. On the opposite end, apply the sealant to the
end of the nozzle
2. Thread the nozzle onto the meter. Screw it in
tightly with an open-ended adjustable wrench
3. Open all dispense position shut-off valves. Start
the pump to pressurize system
4. Before use, to ensure accuracy, purge all air
from the fluid lines and dispense valve(s)
3. OPERATING THE METER
WARNING
After using the manual anti-drip valve, it is important to discharge the
pressure between chambers (1) and the manual valve (2) of the spout.
First, the pump must be switched off. Then, unscrew the tip of the valve
(2) During this discharging operation, do not use the trigger (3).