RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona M30 Card Printer User Guide (Rev. 1.0)
5-48
Using the Overlay / Print Area
Use these
Overlay / Print Area
options to control both the print and overlay together or
control each individually. (
Note:
Determine whether to use the Frontside option (via the
Front
radio button) or the Backside option (via the
Back
radio button).)
Step Procedure
1 Select
For Print and Overlay
for the defined area to apply to both the printing and
overlay process.
OR
Select
For Overlay Only
for the
defined area to apply only to the overlay process.
(
Note:
In this mode, printing will still be allowed over the entire card and only the
overlay will be affected.)
OR
Select
For Print Only (No Overlay)
for the defined area to apply only to the print
process. (
Important:
In this mode, the overlay is completely disabled so it will not
be applied.)
Caution:
An overlay or an overlaminate must protect dye-sublimation
printing or it will quickly begin to wear or fade.
