RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
39
Resolving problems with the flashing On/Cancel LED light
Step Procedure
1
If the
On/Cancel
LED is flashing, this indicates a possible error with the Printer’s
memory. Contact the authorized reseller for technical assistance.
Resolving problems with Windows 95/98 printing capabilities
Print with either the
32-Bit Print Spooler
or the
Write Direct to Port
option selected from
within the Printer Driver setup. In most cases, one or the other of these options will provide
the best results when printing from Windows 95/98.
Due to the wide variety of PC hardware and software configurations, however, some systems
may print more effectively through the Windows 95/98 print spooler.
If you choose not to print with either the 32-Bit Print Spooler or the Write Direct to Port option
selected, but instead wish to print through the Windows print spooler, the following steps will
help you optimize the system for printing:
Step Procedure
1
Click the
Start
button, point to
Settings
and select
Printers
. When the Printers
window appears, click on the Printer’s icon using the right mouse button and
select the
Properties
option.
2
Select the
Details
tab, then select the
Spool Settings
button.
3
Select the
Print directly to the Printer
option and click on
OK
.
4
Again from the Details tab, select the
Port Settings
button.
5
Deselect both the
Check Port state
before printing
option and the
Spool
MS-DOS print jobs
option and click on
OK
.
6
Increase the
Transmission retry
value of the Details tab from 45 to
900
. Click
on
OK
to close the Properties window.
