RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)
10-24
Selecting the Self Tests tab in the Diagnostics Utility
Use these options to run the internal Printer Self Tests.
Step Procedure
1
Select the appropriate
Run
button to execute either the Barcode Test Card,
the Standard Self Test or the Magnetic Self Test, as shown below. (
Note:
These options apply to the DTC400, DTC300 and DTC300M Printers).
•
Click on the
Barcode Test Card
button to test the resin printing capabilities
of the Printer (
Note:
A full color ribbon (YMC) with a resin panel (K) or a
resin ribbon is required for this test.)
•
Click on the
Standard Self Test
button to determine Image Placement and
confirm that the Printer is working properly. (
Note:
The image consists of
fifteen (15) gray scale boxes. The gray boxes are composed from a
composite of YMC color panels.)
•
Click on the
Magnetic Self Test
button to test the Magnetic Encoding
capabilities of the Printer. (
Note:
Be sure to have magnetic stripe cards
installed in your Printer when running this test.)
