RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)
4
exposed to static electrical discharges, 6-3
F
Fargo Technical Support, 12-1
Fargo Technical Support via the Web, 12-1
FCC, 2-2
feed card into encoder, 4-4
Field Separator (FS), 5-49
Film, 14-7
Firmware, 14-7
Flash Memory, 14-8
Font, 14-8
For Overlay Only, 5-55
For Print and Overlay
,
5-55
FPGA (Field Programmable Gate Array),
14-8
Front Cover, 2-9
Full bleed, 14-8
Full Card
option, 5-53, 5-73
G
Gamma, 14-8
Glossy / Matte, 14-8
Glossy PVC, 14-8
Graphical Device Interface (GDI), 14-8
Gray Scale, 14-8
H
Halftoning, 14-8
Hard Drive, 14-9
hard Drive space
adequate or inadequate, 4-5
HDP (High Definition Printing™), 14-9
Head, 14-9
Headlift Motors, 4-33
Headlift Sensors, 4-33
Heat Seal, 14-9
Heat sink, 14-9
HiCo (High Coercivity), 14-9
high-resolution, 24-bit color images, 4-50
Horizontal
adjustment, 5-35
HTML (HyperText Markup Language),
14-9
HTTP (HyperText Transfer Protocol), 14-9
Humidity, 2-4
I
IC (Integrated Circuit), 14-9
ID (Identification), 14-9
Identification Card sample, 5-77
IEEE 1284 (Institute of Electrical and
Electronics Engineers 1284), 14-10
Image, 14-10
Image Color tab, 5-18, 5-29
Image Darkness option, 5-88
Image Placement, 4-48, 4-49
Image Placement option, 5-89
image placement problems, 4-48
Image Placement value, 5-89
Image Position controls, 5-34
inches
or
mm
option, 5-8
incorrect image darkness problems, 4-41
increase Printhead heat, 5-88
Input, 14-10
Input Hopper, 14-10
integral resistor, 6-3
Interface, 2-4
Intermediate Transfer Media (InTM), 14-
10
internal electrical components, 6-3
internal Printer settings, 5-33
ISO, 14-10
ISO 7811-2 Magnetic Stripe, 5-48
ISO encoded data format, 5-41
ISO Standard selections, 5-46
ISO Standard settings, 5-39
ISO Track Locations, 5-48
ITS-EMC, 2-2
ITS-EMC, 2-2
J
JIS II (Japanese Industrial Standard), 14-10
K
K Panel, 14-10
K Panel Resin
options, 5-61, 5-82
K Panel Resin tab, 5-72
L
Lamination, 14-10
Lamination Drive, 9-3
