manualshive.com logo in svg

FARGO electronics DTC400e, Руководство пользователя

Поделиться
Скачать
FARGO electronics DTC400e Скачать руководство пользователя страница 273

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

11-5

Dye Migration 

The diffusion of dye out of the card surface and into another 
receptive surface, such as a vinyl pouch card holder, resulting in a 
faded image.  

Dye-Sublimation 

Also called dye diffusion/thermal transfer, it is the process of 
heating a dye suspended in a cellulous substrate until the dye can 
flow, diffusing into the dye receptive surface of the card or InTM. 
This produces the image in the surface of the card. 

E-card 

An abbreviation for electronic card. A generic term used to 
reference any card with built-in electronic devices such as smart 
cards or prox cards. 

E-card Docking 
Station 

The device in the Printer that accepts smart cards with an ISO 
smart card contact station. This allows the user to write to the smart 
card chip with a standard RS-232 interface in the back of the Printer 
or with the optional built-in encoder. 

Edge-to-Edge 

Refers to the maximum printable area on a card resulting in printed 
cards with virtually no border.  

ECP Mode 
(Enhanced 
Capabilities Port 
Mode) 

A type of parallel port mode, developed by Microsoft, to increase 
the port throughput and improve performance.  

EE Memory 

An abbreviation for EEPROM.  

EEPROM 
(Electrically Erasable 
Programmable Read 
Only Memory) 

A microchip based non-volatile memory storage device that can be 
rewritten in the field. The chip can hold new values as the Printer 
adapts its operational parameters.  

Encoder (smart card) 

An electro-mechanical interface to transfer data from the PC to a 
chip or Magnetic Stripe built into the card.  

 Encoder (wheel)  

An electromechanical device, attached to a shaft that detects the 
change in rotational position, incremented to count ticks per 
revolution. The Printer's encoder wheel both detects motion and 
measures the amount of rotation in the movement of the Ribbon. 

Engine 

A generic term for a collection of systems and mechanisms that is 
dedicated to executing a specific function. A Printer that also 
laminates would have both a print engine and a lamination engine. 

EOF (End Of Form) 

The trailing edge of the card, detected to indicate when the Printer 
should stop printing.  

EPP (Enhanced 
Parallel Port) 

A type of parallel port mode, developed by Intel, to increase the port 
throughput.  

Содержание DTC400e





























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды