manualshive.com logo in svg

FARGO electronics DTC400e, Руководство пользователя

Поделиться
Скачать
FARGO electronics DTC400e Скачать руководство пользователя страница 25

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0) 

2-11

A clear overlay panel (O) is also included Ribbons to protect the dye-
sublimation images. Dye-Sublimation images must have an overlay panel 
applied to them or they will quickly begin to wear or fade. 

 

Printer Components:  Blank Cards 

Type Description 

Card Size 

The Card Printer accepts standard CR-80 and CR-79 sized cards. 

Card 
Design 

The Printer will print onto any card with a clean, level and polished PVC 
surface.  

Although the Printer is equipped with card cleaning Rollers, it is very 
important to always print onto cards specifically designed for direct-to-card 
dye-sublimation printing.  

Card 
Surface 

Suitable cards must have a polished PVC surface free of fingerprints, dust or 
any other types of embedded contaminants.  In addition, cards must have a 
completely smooth, level surface in order for the Printer to achieve consistent 
color coverage.  

Certain types of Proximity cards have an uneven surface that will inhibit 
consistent color transfer.  

•

  Certain types of smart card chips are raised slightly above the cards 

surface which also results in poor color transfer. 

UltraCard 
Stock 

Due to the importance of using high-quality blank cards, a factory-approved 
card stock called UltraCard™ is available and recommended for best results. 

•

  UltraCard stock has a glossy PVC laminate on top and bottom and is 

optically inspected to provide the cleanest, most scratch and debris-
reduced cards possible.  

•

  Two types of these cards are available: UltraCard and UltraCard III. 

UltraCard stock has a PVC core and offers medium card durability. 
UltraCard III stock has a 40% polyester core and offers high durability.  

•

  Both types of UltraCards produce printed images with a glossy, photo-

quality finish. 

 

The following guide will walk you through the installation of the Persona C30e/M30e Card 
Printer Driver.  

•

 

Time Requirement (software):

  This software installation process will require 

approximately 2 to 5 minutes (depending on the speed of your PC). 

•

 

Time Requirement (Printer):

  The time required to set up a standard Persona 

C30e/M30e Printer would be approximately 5 to 10 minutes. 

Содержание DTC400e





























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды