FARGO electronics DTC400e Скачать руководство пользователя страница 250

Страница: 250 / 284

RESTRICTED USE ONLY

Fargo Electronics, Inc.

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.0)

7-12

Selecting the NONE- Re-Writable Ribbon Type
DTC400e/C30e

Follow these instructions:

Caution:

No Ribbon is used with these cards. Do not load a Ribbon into the printer when

using this process. Printing on the Re-Writable card with a Ribbon will ruin the card.

•

The default setup is for the printer to first erase the previously-printed card; then write the

NEW information on the card. (

Note:

If you are printing to a NEW card, select WRITE

ONLY. This will speed up the process. The FULL card is erased and printed; there is no
option to select specific areas to erase.)

•

To print/erase a certain section use the “Overlay/Print Area” tab in the driver. Select the

specific area in the same manner as the print job with the color ribbon.

•

To erase many cards, use the Fargo Workbench Re-Writable Card Eraser option. (

Note:

This option does not print only erase.)

Содержание DTC400e





























































































































































































































































































Результаты поиска

Содержание DTC400e

Отзывы:

Бренды по названию

Популярные бренды

FARGO electronics DTC400e, Руководство пользователя

Результаты поиска

Содержание DTC400e

Отзывы:

Бренды по названию

Популярные бренды