![background image](http://html1.mh-extra.com/html/farberware/millennium-fpc512s/millennium-fpc512s_use-and-care-instructions-manual_3438847006.webp)
5
HOW TO SET TIME
1. Plug the unit into a standard 120V AC wall outlet.
2. Wait until the hour on the LCD starts blinking.
3. Press the CLOCK Button to set the correct
hour
setting.
4. Press the SET Button to switch to the
minute
setting.
5. Press the CLOCK Button to set the correct
minute
setting.
6. Press the SET Button to leave the clock in
the setting mode.
Please Note:
There is no icon for AM, only
the PM icon will be present.
(See Figure A.)
HOW TO PROGRAM FOR BREWING COFFEE
1. Press and Hold the SET Button until
the HOUR on the LCD Display begins
to blink.
2. Press the PROGRAM Button until the
BELL icon is shown. (See Figure B.)
3. Press the CLOCK Button until you reach
the desired brewing
hour.
4. Press the SET Button to switch to the
minute
setting.
5. Press the CLOCK Button until you reach the desired brewing
minute.
6. Press the SET Button to enter/finalize the desired brewing time.
7. Press the PROGRAM Button to activate the PROGRAM setting. The
BELL icon will blink, indicating the PROGRAM time has been set.
The Percolator will begin brewing at the
time you set. The Percolator will beep to
indicate that the brewing has begun. The
LCD Display will show the following to
indicate it has begun brewing. (Figure C.)
Brewing will take approximately 1 minute
per cup.
After that, the coffee will be kept hot for 2 hours. After 2 hours, the
Percolator will beep 3 times and automatically shut off.
You can check the PROGRAM time at any time by pressing the SET
Button once. If there is no programmed brew time set, the LCD will
show 4 lines . (See Figure D.)
Figure A
Figure B
Figure C