manualshive.com logo in svg

Faraday 12530-120, Руководство пользователя

Поделиться
Скачать
Faraday 12530-120 Скачать руководство пользователя страница 13

1 2 5 3 0 / 1 2 5 4 0   O W N E R ' S   M A N U A L

 

P/N 447203  Issue I 

II-4

 

BATTERY SETS 

The 12530/15240 control unit is designed to use only sealed lead-acid or equivalent batteries for back-up 
power.  Attaching a close-coupled battery box, if required, may use battery sets beyond the physical 
capacity of the enclosure (10 AH). 

AUXILIARY MODULES 

Remote LCD Annunciator 

The Faraday 12506 remote LCD annunciator consists of a backlit 80 character LCD alphanumeric 
display, 4 menu buttons, 4 dedicated buttons for operator interaction, 6 LED indicators, and a security 
key-switch.  The display and controls on the annunciator are the same as those on the front of the control 
unit, including a key-switch for security.  The back light operates only when the data are being accessed, 
to conserve power. 

Up to sixteen annunciators may be addressed by the communications circuit, but some may require 
12408 auxiliary power supplies, depending on the total accessory power loading. 

Serial Relay Unit and Serial Relay Extender 

The Faraday 12507 includes a processor board and a relay board.  The processor board receives 
commands from the control unit for activating the relays and transmits supervision and control functions 
to the control unit.  The processor board can control up to 3 relay boards.  Each relay board provides 8 
relays with form C contacts.  The control unit can address up to 8 Serial Relay Units and/or Serial 
Annunciator Units.  Faraday 12408 auxiliary power supplies will be required to power units beyond the 
control unit capability. 

Serial Annunciator Unit and Serial Annunciator Extender 

The Faraday 12509 includes a processor board and an annunciator driver board.  The processor board 
receives commands from the control unit for activating the outputs and transmits supervision and control 
functions to the control unit.  The processor board can control up to 4 annunciator driver boards.  Each 
driver board provides 16 supervised outputs for LEDs or incandescent lamps.  The control unit can 
address up to 8 Serial Relay Units and/or Serial Annunciator Units.  12408 auxiliary power supplies will 
be required to power units beyond the control unit capability. 

Network Interface Board 

The Faraday 12523 Network Interface Board provides an interface between the associated control unit 
RS232 connection and an MPC-NET network.  The Network Interface Board is powered from the control 
unit auxiliary power output.  For further installation instructions, see the MPC-NET manual P/N 447259. 

Auxiliary Power Supplies 

The Faraday 12408  Auxiliary Power Supply can be used to provide additional power for notification 
appliance circuits.  The 12408 has two 1.5A power-limited outputs and a trouble relay contact for 
monitoring by the control unit. 

Содержание 12530-120
































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды