FAR LV13C46S22W, Руководство пользователя

Страница: 66 / 98

Connec on between water inlet pipe and faucet
1. Check the rubber seal on both sides of the hose. Insert the rubber seal into
the threaded joint of each hose to prevent leakage.
2. Connect the water supply hose to the faucet by hand, and then ghten it
for 2/3 turn with pliers.
3. Turn on the faucet to flush the foreign ma ers (dirt,sand or sawdust)in the
water pipe a er connec ng the water inlet hose to the faucet. Drain the
water into a bucket and check the water temperature.
4. Connect the hose to the water inlet valve ghtly by hand,and then ghten it
for 2/3 turn with pliers.
5. Turn on the faucet to check leakage. In case of water leakage, please check
steps 1-4.
Connect the power supply
• Please connect this machine to a grounding socket according to the current
electrical wiring specifica ons and protect it with a circuit breaker or me-
delay fuse of at least 15 Amps.
• The two-wire system with grounding must be adopted for wiring.
• Do not put the power cord behind this machine,but connect the plug within
1.2m of the side.
Rubber seal
Weater inlet
Weater hose
GB-16