FAR LV13C46S22W, Руководство пользователя

Страница: 70 / 98

• If the so water system is not required, this machine can be used without
dishwashing salt, but the hardness level needs to be set to HO so that the
corresponding icon will not be on all the me.
• In order to achieve a sa sfactory washing effect, this machine needs so
water, otherwise water stains will remain on the tableware and inside the
dishwasher.
• If the hardness of tap water exceeds a certain level, it must be so ened, i.e.
decalcified, by adding dishwashing salt to the water so ener inside the
dishwasher. The amount of salt required is set according to the hardness of
the tap water.
So
So
medium
medium
medium
medium
hard
hard
hard
Mmol/I
Set value on the
machine
Water hardness
Range
-
0-1.1
1.2-1.5
1.6-1.8
1.9-2.2
2.2-2.9
3-3.8
3.9-5.4
5.5-8.9
-
0-7.7
8.4-10.5
11.2-12.6
13.3-15.4
16.1-20.3
21-26.7
27.4-37.9
38.6-62.5
°
Clark
Water hardness table
H0
H1
H2
H3
H4
H5
H6
H7
H8
Check the water hardness
1. Check the local water hardness. The water company can help you check it.
2. Set the so ening system level of the dishwasher according to the hardness
level of water.
Set the so water system
Adjust the se ngs according to the hardness level of the water used in the
water supply. The water so ener has 9 adjustment levels, and the dishwasher
has been set to the water hardness level of H5 when leaving the factory.
1) Ensure that the dishwasher has been turned off, and press the
"Intensive" and “Machine Care" bu ons for 3s to set the program.
2)Press the "Intensive" bu on. Display the current se ng.
GB-20