FAR KJ 70-A, Перевод оригинальной инструкции

Страница: 10 / 24

GB
10 Date 04-2017 Revisione - 00
KJ 70-A
TOOL IDENTIFICATION
The riveting tool KJ 70-A is identified from a marking that shows
company name and address of manufacturer, designation of
the tool, CE. Always refer to the information on the riveting tool
when requesting technical service.
GENERAL NOTES AND USE
The tool can be employed only for blind rivet nuts with thread
of
6-32 e 1/2"-13 diameter.
The KJ 70-A oil pneumatic system assures more power than
the pneumatic system used for other models. That means
a reduction in the problems due to the wear and tear of the
components, therefore, there will be an increase in reliability.
The technicai solutions adopted reduce the dimensions and the
weight of the tooi which, for these reasons, make it very handy.
The possibilities of leakage from the oil-dynamic system, are
eliminated by some sealed gaskets, which solve this problem.
TECHNICAL DATA
• Working pressure ...................................................... 87 psi
• Min. int. diam. of the compressed air
feeding hose ........................................................... 0.315"
• Air consumption per cycle ........................................ 6.3 in³
• Max power ................................................ 87 psi - 3070 lbf
WEIGHT:
• Gun
.......................................................................... 4.52 lb
• Total ............................................................................ 15 lb
• Working temperature ..................................... -23°F/+122°F
• Root mean square in total acceleration frequency (Ac)
to which the arms are subjected. .....................
<
98.42 ips²
• A-weighted emission sound pressure level ............. 78 dBA
• Peak C-weighted instantaneous sound pressure <130 dBC
• A-weighted sound power ........................................ 90 dBA
MAIN COMPONENTS
A)
..................................................... Ring nut clamping head
B) ................................ Insertion Pin Hole Dechucking clutch
C) ...........................................................Balancer connection
D) ................................................Ring nut adjustment stroke
E) ............................................................... Pneumatic motor
F) .................................................................Threaded tie rod
G) ...................................................................................Head
H) ........... Drive trigger: Pos. 1 Tiraction - Pos. 2 Unscrewing
I) ...................................................
Compressed air connection
L) .......................................................................Oil filler plug
M) ......................................................................Service plug
N) ................................................................ Oil level indicator
KJ 70-A
KJ 70-A
KJ 70-A
5.9”
12.5”
6.5”
Ø 1”
3.5”
13.8”
Ø 1.7”
10.4”
A
I
M
N
L
H
2
1
F
E
B C D
G
AIR FEED
The air feed must be free from foreign bodies and humidity in
order to protect the tool from premature wear and tear
of the components in movement, therefore we suggest to use
a lubrificator group for compressed air.
Company name and
address Designation of
the tool
Serial number