<
文档标题
>
Fanvil Technology Co., Ltd
HQ Add: 4F, Block A, Building 1#, GaoXinQi Hi-Tech Park (Phase-II
)
, 67th District, Bao'An, Shenzhen, China 518101 P.R.
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: [email protected]
Beijing
Suzhou Tel: +86-512-6592-0605
Enable Password Dial
Enable Password Dial by selecting it, When
number entered is beginning with the password
prefix, the following N numbers after the
password prefix will be hidden as *, N stand for
the value which you enter in the Password
Length field. For example: you set the password
prefix is 3, enter the Password Length is 2, then
you enter the number 34567, it will display 3**67
on the phone.
Encryption Number Length
Configure the Encryption Number length
Password Dial Prefix
Configure
the prefix of the password call
number
Restrict Active URI Source IP
Set the device to accept Active URI command
from specific IP address.
NOTICE! This feature
is usually used for device management and
will be described in “X4 Administration
Guide”
Push XML Server
Configure the Push XML Server, when phone
receives request, it will determine whether to
display corresponding content on the phone
which sent by the specified server or not.
Allow IP Call
If enabled, user can dial out with IP address
Enable Multi Line
Enable phone to make calls for 10 lines max, or
disable for 2 lines max.
Enable Default Line
If enabled, user can assign default SIP line for
dialing out rather than SIP1.
Enable Auto Switch Line
Enable phone to select an available SIP line as
default automatically
DND Response Code
Set the SIP response code on call rejection on
DND
Busy Response Code
Set the SIP response code on line busy
Reject Response Code
Set the SIP response code on call rejection
Play Talking DTMF Tone
Play DTMF tone on the device when user
pressed a phone digits during taking, default