<
文档标题
>
Fanvil Technology Co., Ltd
HQ Add: 4F, Block A, Building 1#, GaoXinQi Hi-Tech Park (Phase-II
)
, 67th District, Bao'An, Shenzhen, China 518101 P.R.
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: [email protected]
Beijing
Suzhou Tel: +86-512-6592-0605
Second Codec
The second preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32,
ILBC,AMR,AMR-WB,NONE
Third Codec
The third preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32 ,
ILBC,AMR,AMR-WB,NONE
Fourth Codec
The forth preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32 ,
ILBC,AMR,AMR-WB,NONE
Fifth Codec
The fifth preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32,
ILBC,AMR,AMR-WB,NONE
Sixth Codec
The sixth preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32,
ILBC,AMR,AMR-WB,NONE
Onhook Time
Configure the least reflection time of Hand down,
the default is 200ms.
Tone Standard
Set the country standard of call progress tones,
including dial tone, busy tone, ring-back tone, etc.
Default Ring Type
Set the default ring type. If the caller ID of an
incoming call was not configured with specific ring
type, the default ring will be used.
Handset Volume
Set the Handset volume, the value must be 1~9
Headset Volume
Set the Headset volume, the value must be 1~9
Headset Ring Volume
Set the ring volume in the headset, the value must
be 0~9
Speakerphone Volume
Set the speakerphone volume, the value must be
1~9
Speakerphone Ring Volume
Set the ring volume in the speakerphone, the
value must be 0~9
Headset Volume Offset
This is to adjust the base volume of the headset.
Please note when set the volume at the maximum
level it may create noise and decrease the echo
canceller.