<
文档标题
>
Fanvil Technology Co., Ltd
HQ Add: 4F, Block A, Building 1#, GaoXinQi Hi-Tech Park (Phase-II
）
, 67th District, Bao'An, Shenzhen, China 518101 P.R.
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: [email protected]
Beijing
Suzhou Tel: +86-512-6592-0605
Headset Mic Offset
This is to adjust the base volume of the headset
Mic.
G.729AB Payload Length
Set G729 Payload Length.
G.723.1 Bit Rate
5.3kb/s or 6.3kb/s is available
G.722 Timestamps
160/20ms or 320/20ms is available
DTMF Payload Type
Enter the DTMF payload type, the value must be
96~127.
Enable VAD
Enable Voice Activity Detection. When enabled,
the device will suppress the audio transmission
with artificial comfort noise signal to save the
bandwidth.
Enable MWI Tone
The phone will play MWI tone when a new MWI
Comes
Auto Answer By Headset
When this item is checked, the device will
auto-answer phone calls by headset if the
auto-answer or intercom is enabled.
7.18
PHONE / MCAST
This feature allows user to make some kind of broadcast call to people who are in multicast group.
User can configure a multicast DSS Key on the phone, which allows user to send a Real Time
Transport Protocol (RTP) stream to the pre-configured multicast address(es) without involving SIP
signaling. You can also configure the phone to receive an RTP stream from pre-configured multicast
listening address(es) without involving SIP signaling. You can specify up to 10 multicast listening
addresses.
Table 7 - MCAST Parameters on Web
Parameters
Description
Normal Call Priority
Define the priority of the active call, 1 is the
highest priority, 10 is the lowest.
Enable Page Priority
The voice call in progress shall take precedence
over all incoming paging calls.
Name
Listened multicast server name
Host:port
Listened multicast server’s multicast IP address
and port.
