45
Call status trigger
The port outputs a continuous time trigger type, including the trigger
condition. For example, the call triggers the output port, and the output port
will be in the call state and continue to respond)
1 Talking
2 Talking and Ringing
3 Ringing
4 Calling
5. Call and talk
6. Call and talk (caller)
7. Calling and ringing
8. Talking and ringing (called)
9. Talking and ringing
10. Call, ring and talk
Tamper Alarm Settings
Tamper detection
If the terminal is violently demolished, the terminal is triggered to always play
the set alarm ringtone
Warning
instruction
After the alarm is triggered, the command set by the Alarm command is sent
to the server at the same time
Alarm recovery
If you need to stop the alarm ringtone, the remote end can send a short
message to the terminal. The content of the short message is the value set in
the Reset command. At this time, the test terminal will stop the alarm ringtone
playback
Alarm status
recovery
Reset to stop the playback of the ringtone
Ring Type
Ringtone can be set to none / preset
Server Settings
Server Address
Configure the remote response server address (including the remote
response server address and trigger alarm server address, IP:PORT, SIP
number). When the input port is triggered, a short message will be sent to the
server. The message format is as follows: Alarm Info: Description=i12;SIP
User=;Mac=00:a8:34:68:23:d1;IP=172.18.2.243;port =Input1 (support
variables and strings)
9.26 Function Key >> Function Key
Key Event
You can set the function type of these keys to Key Event, and there are multiple options for
sub-types.
