25
PPPoE
Account and Password must be input manually. These are
provided by your ISP.
If Static IP is chosen, the screen below will appear. Enter values provided by the ISP.
DNS Server
Configured by
Select the Configured mode of the DNS Server.
Primary DNS
Server
Enter the server address of the Primary DNS.
Secondary DNS
Server
Enter the server address of the Secondary DNS.
：
1
）
After setting the parameters, click
【
submit
】
to take effect.
2
）
If you change the IP operation, the web page will no longer respond, at this time
should be entered in the address bar new IP to connect to the device.
3
）
f the system USES DHCP to obtain IP at start up, and the network address of the
DHCP Server is the same as the network address of the system LAN, then after the
system obtains the DHCP IP, it will add 1 to the last bit of the network address of LAN
and modify the IP address segment of the DHCP Server of LAN. If the DHCP access is
reconnected to the WAN after the system is started, and the network address assigned
by the DHCP server is the same as that of the LAN, then the WAN will not be able to
obtain IP access to the network
Service Port Settings
Web Server
Type
Specify Web Server Type – HTTP or HTTPS
HTTP Port
Port for web browser access. Default value is 80. To enhance security,
change this from the default. Setting this port to 0 will disable HTTP
access.
Example: The IP address is 192.168.1.70 and the port value is 8090,
the accessing address is http://192.168.1.70:8090.
HTTPS Port
Port for HTTPS access. Before using https, an https authentication
certification must be downloaded into the equipment.
Default value is 443. To enhance security, change this from the
default.
