Fantini Cosmi CH150TS Series, Руководство пользователя

Страница: 22 / 28

22
In-
dex
Parameter Writing Values Preset
value
1 Type of connected
card COn rEL / rAd / --- none
2 Temperature scale CELS o
FHAr
°C / °F °C
3 Type of regulation Std o
ProP
Std / ProP Std
3A Thermal
differential DIFF HI / LO LO
3A Regulation band BAnd 1 °C – 4 °C
(step 0.1°C) 2 °C
3B Regulation period Per 5 / 10 / 20
minutes 10
minutes
4 Separate
temperature probe
con
fi guration
Sect --- / FLO / In
/ Out ---
4A Floor temperature
limit T fl o 15 °C –
45 °C 27.0 °C
5 Ambient
temperature
correction Corr -4.0 °C
to +4.0 °C 0.0 °C
6 Optimization Opt ON/OFF OFF
6A Max. optimization
duration (hours) OPtH 1h – 5h 2h
7 Pump anti-seizure Pu ON/OFF OFF
In-
dex
Parameter Writing Values Preset
value
8 Low battery bAtt --- / On /
OFF OFF
9 Software release SOFt xxx xxx
Type of connected card
The chronothermostat can check whether the
base is connected. If it is not connected dash-
es will be displayed whereas when it is con-
nected the writing rEL is displayed. Writing rAd
is displayed in radiofrequency versions.
Temperature scale
To select the temperature scale to be dis-
played: Celsius (centigrade) or Fahrenheit.
When choosing the Fahrenheit scale, temper-
atures may range between 0.0 and 99.9 °F.
Type of regulation
To select the temperature regulation mode:
differential (Std) or proportional (ProP). This
parameter is used for heating only.
Thermal differential
To set the thermal differential value to be used